PMD Core Ontology Joins Smart Data Models: 6 Candidate Models for Materials Processing and Testing

Smart Data Models’ Candidates repository now includes a new candidate standard translated from the Plattform MaterialDigital Core Ontology (PMDco): pmd-core-ontology, with 6 candidate models for materials, the objects and devices made and used with them, manufacturing processes, tests and their results. PMDco is published under CC-BY-4.0. Like every candidate, each model comes with a JSON Schema, an NGSI-LD @context and all four example serializations (NGSI-v2 and NGSI-LD, key-values and normalized), each validated against its schema.

About the PMD Core Ontology

The PMD Core Ontology is the mid-level ontology of the German Plattform MaterialDigital for materials science and engineering. It is built on the Basic Formal Ontology (BFO, ISO/IEC 21838-2) and reuses RO, IAO and OBI. It follows the processing, structure and properties view of materials: manufacturing, characterisation and simulation processes; materials, objects and devices; and material properties with their values. Release 3.1.2 (October 2026), translated here, has 1,426 classes. PMDco also publishes modelling patterns for typical cases (a measurement, a chemical composition, a device identifier), and the translation follows them.

The models

Model PMDco / BFO class Classes covered Example
Material material 181 (metals, steels, alloys, ceramics, glasses, polymers…) S355 structural steel sheet
Object object (BFO) 27 (ingot, billet, plate, sheet, tube, tensile testpiece…) Tensile test piece Zx2
Device device 107 (testing machines, microscopes, furnaces, saws…) Instron 4505 tensile testing machine
ManufacturingProcess manufacturing process 68 (DIN 8580: primary shaping, forming, separating, joining, coating…) Machining of the test pieces (illustrative)
Assay assay (OBI) 62 (tensile, hardness, fatigue testing, microscopy, spectroscopy…) Tensile test to DIN EN ISO 6892-1
MeasurementDatum measurement datum (IAO) – Tensile strength Rm = 504 MPa

Real test data from BAM

The examples describe one real tensile test from the S355 steel reference dataset of the Bundesanstalt für Materialforschung und -prüfung (BAM), published on Zenodo under CC-BY-4.0 and already used by the PMD tensile test ontology. They describe the S355 (1.0577) sheet, test piece Zx2 with its measured thickness, width, cross section and gauge length, the Instron 4505 testing machine, the test of 22 February 2021 at a strain rate of 0.00025 1/s, and the resulting tensile strength of 504 MPa. The operator’s name is left out. Only the manufacturing process example (machining the test pieces out of the sheet) is illustrative, because the dataset only says that the pieces were taken in rolling direction. That example says so in its source.

Translation notes

  • One entity per branch, classes as an enum. Each model has a pmdClass attribute that holds the specific PMDco classes (for example steel and structural material), the same approach as the EMMO, Brick and OEO candidates. Subclasses that PMDco states only through class intersections are included. Deprecated classes are left out.
  • Names from the labels. PMDco identifiers are opaque (PMD_0000833), so the models and attributes use the PascalCase / camelCase form of the English labels (ManufacturingProcess, hasSpecifiedInput, isQualityMeasurementOf). Each @context maps every term to its PMDco, BFO, RO, IAO or OBI IRI.
  • Values flattened, following PMDco’s own patterns. Each characteristic and its scalar value specification becomes one item {class, number, unit}. Chemical composition, process attributes, identifiers and time intervals are flattened the same way. PMDco defines no units, so QUDT unit IRIs are used.
  • Specimens as roles. PMDco has no specimen class. A test piece is an Object (such as tensile testpiece) that bears the evaluant role.
  • Licence. PMDco and the BAM data are both CC-BY-4.0, and both are attributed in every example.

Try it, and tell us what’s missing

These are Candidates: first, carefully sourced translations that are not yet official Smart Data Models subjects. The main open question is the overlap with the EMMO candidate, which covers materials, manufacturing and measurement on a different foundation, and the use of generic type names (Device, Material, Object) that already exist in dataModel.Device, dataModel.ZEB and other candidates. dataModel.ManufacturingMachine and dataModel.IndustrialProcess also overlap in part. Natural next steps are PMDco’s simulation and workflow processes and the PMD application ontologies, such as the tensile test ontology, which add test-specific quantities.

Browse the models, open an issue, or send a PR:
👉 https://github.com/smart-data-models/Candidates/tree/master/standards/pmd-core-ontology

Bookmark the permalink.

Comments are closed.